• <dd id="uqmck"></dd> <dd id="uqmck"></dd>
    <menu id="uqmck"></menu>

    生物質顆粒機壓軸打滑問題怎么處理?、

    來源:http://www.3buildersinc.com 發布時間:2020-07-09 瀏覽次數:
    一旦生物質顆粒機出現壓軸出現打滑的時候,不但會影響到制出來的顆粒產量,而且也會嚴重影響到顆粒的產量。生物質顆粒機是把生物能源壓制成粒,做燃料用的。木屑顆粒機一共可以分為兩種,一是離心制粒機,一是平模制粒機。其中離心顆粒機是我們的核心產品,是專門針對木屑制粒研發的產品,推薦使用。所以我們在出現在這方面問題的時候要即使采取相應的處理方式,這樣才會把損失降到小,保證顆粒機的生產效率和生產質量。
    Once the biomass pellet machine appears to slide, it will not only affect the production of particles, but also seriously affect the output of particles. Biomass pellet machine is used to compress bioenergy into pellets for fuel. Sawdust granulator can be divided into two types, one is centrifugal granulator, the other is flat die granulator. Centrifugal granulator is the core product of our patent, which is specially developed for sawdust granulation. It is recommended to use. Therefore, even if we adopt corresponding treatment methods, we can reduce the loss to a small extent and ensure the production efficiency and quality of the granulator.
    那一般都會在什么樣的情況下才會出現這樣壓軸打滑呢那處理方式是這么呢下面給您介紹一下生物質顆粒機壓軸打滑問題及處理方式:
    Under what kind of conditions will the spindle slip occur? What's the treatment method? Let's introduce the problem and treatment method of biomass pellet machine's roller slip:
    一、顆粒機壓軸間隙太大會影響使壓軸打滑
    1、 Too much clearance between the press shaft of the granulator will affect the shaft slipping
    我們在使用生物質顆粒機進行作業的時候,如果沒有控制好顆粒機壓軸之間的間隙,很容易出現在制粒過程中制出來的顆粒不夠均勻,產量偏小,并且使得顆粒機壓錕不能夠緊緊的壓制物料,這樣會很容易出現壓軸打滑的現象。解決這方面好的辦法能夠縮小顆粒機兩主軸之間的距離。
    秸稈顆粒機廠家
    When we use biomass granulator for operation, if we do not control the gap between the pressure shafts of the granulator, it is easy to see that the particles produced in the granulation process are not uniform enough, the output is too small, and the granulator roller can not tightly press the materials, which will easily lead to the phenomenon of the spindle slipping. A good way to solve this problem can reduce the distance between the two main shafts of the granulator.
    二、顆粒原料水分過大會影響壓軸打滑
    2、 Too much moisture in granular raw materials will affect the shaft slipping
    把原料用生物質顆粒機壓制的時候,原料物料含水分過大或在通過生物質顆粒機的時候產生的蒸汽較大,會導致在生物質顆粒機制料作業的時候由于水分的潤滑作用會導致顆粒機壓軸出現打滑現象。解決這方面好的辦法是減少原料物料蒸汽的通入量,保持物料所含的水量控制在較合理的范圍內。
    When the raw materials are pressed by biomass granulator, the moisture content of raw materials is too high or the steam generated when passing through the biomass granulator is large, which will lead to the sliding of the pressure shaft of the granulator due to the lubrication of water during the operation of the biomass pellet machine. A good way to solve this problem is to reduce the steam flow of raw materials and keep the water content of materials within a reasonable range.
    三、顆粒機軸承安裝不夠靈活導致壓軸打滑
    3、 The installation of the bearing of the granulator is not flexible enough, resulting in the slipping of the pressure shaft
    在安裝生物質顆粒機壓錕的軸承的時候千萬不要安裝的太死,否則會導致生物質顆粒機在制粒作業中出現打滑問題。解決這方好的辦法是時刻關注壓錕的壓軸,即使更換新的壓錕。
    When installing the roller bearing of biomass pellet machine, do not install it too tightly, otherwise it will lead to slippage of biomass pellet machine in granulation operation. A good way to solve this problem is to always pay attention to the roller roller, even if a new roller is replaced.
    四、顆粒機壓軸過度使用會影響壓軸打滑
    4、 Excessive use of the pressure shaft of the granulator will affect the shaft slipping
    生物質顆粒機使用的時間長,會導致壓軸磨損(零部件失效的一種基本類型)從而出現壓軸打滑的現象,不能正常的進行致力工作。解決這方面好的辦法是不僅時常保持對生物質顆粒機的清洗工作,還要隨時更換新的壓錕。
    If the biomass pellet machine is used for a long time, it will lead to the abrasion of the pressure shaft (a basic type of parts failure), which will lead to the phenomenon of the spindle slipping, and can not work normally. A good way to solve this problem is not only to keep the cleaning of biomass pellet machine, but also to replace the new roller at any time.
    以上的精彩內容有秸稈顆粒機廠家http://www.3buildersinc.com 提供技術支持,我們的網站上會繼續為大家呈現很多的新鮮資訊,請記得關注我們!
    The above wonderful content has straw granulator manufacturer http://www.3buildersinc.com  Provide technical support, our website will continue to present a lot of new information for you, please remember to pay attention to us!

    上一篇:生物質木屑顆粒機的發展影響著深受大家的關注

    下一篇:秸稈顆粒機具備的高行程有哪些?

    幸运快三