• <dd id="uqmck"></dd> <dd id="uqmck"></dd>
    <menu id="uqmck"></menu>

    秸稈顆粒機廠家帶你了解顆粒機的幾大優勢

    來源:http://www.3buildersinc.com 發布時間:2020-09-21 瀏覽次數:
      秸稈顆粒機廠家帶你了解顆粒機的幾大優勢:秸稈顆粒機的質別不同,壓制出的顆粒,可以作為生物質燃料,亦可作為畜禽飼料。秸稈飼料顆粒機吸取了外顆粒機之精華,為節能新產品。過去一般將飼料加工成粉末后飼喂,存在飼喂不方便、適口性差、家畜挑食、利用率低等缺陷。隨著新型小型顆粒飼料機械的問世及普及,已可以方便地將粉末飼料加工成顆粒飼料。可采用照明電為動力,在壓輥的擠壓下從模孔中壓出制粒,可以很方便地調整顆粒長短,其結構簡單,占地面積小,噪音低,220伏單相電即可操作,適用缺少三相電條件的小型養殖戶使用。
      Straw granulator manufacturers take you to understand the advantages of the granulator: the quality of straw granulator is different, the pressed particles can be used as biomass fuel, but also as livestock feed. The straw feed granulator has absorbed the essence of the granule machine, and is a new energy saving product. In the past, feed was usually processed into powder, but there were some defects, such as inconvenient feeding, poor palatability, picky feeding and low utilization rate. With the advent and popularization of new type small pellet feed machinery, it is convenient to process powder feed into pellet feed. It is easy to adjust the length of the granules. It has the advantages of simple structure, small floor area and low noise. It can be operated by 220 V single-phase power. It is suitable for small-scale farmers who lack three-phase electricity.
      受傳統生產方式和生活習慣的影響,目前我國秸稈利用率只有30%,處理后再被利用的生物質秸稈資源也只占2.6%,相當數量的生物質秸稈資源被廢棄或焚燒,不僅造成資源浪費,還污染空氣。而秸稈顆粒機設備的使用讓我們的的秸稈資源得到了不同的變化
      Affected by the traditional production mode and living habits, the utilization rate of straw in China is only 30%, and the biomass straw resources that are reused after treatment only account for 2.6%. A considerable number of biomass straw resources are abandoned or burned, which not only causes waste of resources, but also pollutes the air. The use of straw granulator equipment makes our straw resources get different changes
      秸稈具有發熱量高、有害氣體排放量少的特點,可以作為一種的生物質原料被能源化利用,這樣可以減少煤炭、石油、天然氣等不能再生能源的消耗。目前,我國秸稈的能源化利用方式主要包括:直燃供熱、氣化、液化和炭化。
      Straw has the characteristics of high calorific value and less harmful gas emission, so it can be used as a kind of biomass material for energy utilization, which can reduce the consumption of coal, oil, natural gas and other non renewable energy. At present, the energy utilization of straw in China mainly includes direct combustion heating, gasification, liquefaction and carbonization.
                     秸稈顆粒機廠家
      板錘的形狀與緊固方式及工作載荷密切相關。板錘的設計應滿足工作可靠、裝卸簡便和提高板錘金屬利用率的要求。板錘一般采用高鉻鑄鐵、高錳鋼和其它耐磨合金鋼制成。板錘的形狀很多,有長條形、T形、S形、工形、斧形和帶槽式等形狀,一般為長條形。振動篩運行過程中經常出現各種故障,了解引起振動篩機故障的原因,正確操作和維護,對減少事故率、延長篩機壽命至關重要。
      The shape of the hammer is closely related to the fastening mode and working load. The design of the plate hammer should meet the requirements of reliable operation, easy loading and unloading and improving the metal utilization rate of the plate hammer. The plate hammer is generally made of high chromium cast iron, high manganese steel and other wear-resistant alloy steel. There are many shapes of the hammer, such as long strip, T-shaped, S-shaped, I-shaped, ax shaped and grooved, which are generally long-shaped. Various faults often occur during the operation of the vibrating screen. It is very important to understand the causes of the failure and to operate and maintain it correctly to reduce the accident rate and prolong the service life of the screen.
      秸稈顆粒機體積小,移動靈活整機重約580公斤,該機柴電兩用。可根據用戶的實際情況選擇用電機或柴油機(電機功率13千瓦,柴油機18馬力)。操作工藝簡單,一個人即可生產,進料鍘切,制粒一次同步完成。該機生產能力為每天4噸成品。
      The straw granulator has the advantages of small volume, flexible movement and overall weight of about 580kg. Motor or diesel engine (motor power 13 kW, diesel engine 18 HP) can be selected according to the actual situation of users. The operation process is simple, one person can produce, feed chopping, granulation at one time. The production capacity of the machine is 4 tons per day.
      1、產能高、價格低、耗電低:dd4-12-300型每小時產能300—500公斤,僅用11千瓦功率電機。
      1. High production capacity, low price and low power consumption: the dd4-12-300 model has a capacity of 300-500kg per hour and only uses 11 kw power motor.
      2、物料適應性強:適應于各種生物質原料的成型,秸稈從粉狀至50mm長度之間,含水率5--30%之間,都能加工成型。
      2. Strong material adaptability: it is suitable for the molding of various biomass raw materials. The straw can be processed from powder to 50 mm in length and moisture content between 5-30%.
      3、電加熱功能:全自動電加熱裝置,可調節物料的干濕度,解決堵塞、不成型的難度。
      3. Electric heating function: fully automatic electric heating device can adjust the dry and humidity of materials to solve the difficulty of blocking and forming.
      4、壓輪自動調節功能:利用推力軸承雙向旋轉的原理自動調節壓力角度,使物料不擠團、不悶機,保證出料成型的穩定。
      4. Automatic adjustment function of pressure wheel: using the principle of bidirectional rotation of thrust bearing, the pressure angle can be adjusted automatically to ensure the stability of discharging and forming.
      5、操作簡單使用方便:自動化程度高,用工少,僅需3人,使用人工上料或輸送機自動上料均可。
      5. Simple operation, easy to use: high degree of automation, less labor, only 3 people, using manual feeding or conveyor automatic feeding.
      6、工藝流程:粉碎—輸運—模壓成型—成品入庫。
      6. Process flow: crushing - Transportation - molding - finished products warehousing.

    上一篇:木屑顆粒機怎樣恰當應用?

    下一篇:木屑顆粒機批發產量低與電壓也有關系?

    幸运快三